ok im trying to get all safelisted users to list in the channel when doing the command well that all works of course but the problem im having is when there is a few users left in my BreakUpUsrs like 3 out of 5 it wont list them well whatever was left in the BreakUpUsrs

well here is the code

[code]
'making sure countme = 0 before starting
CountMe = 0
For i = 1 To Main.SafeList.ListItems.Count
'this keeps adding users from safelist until (countme) hits its limit
BreakUpUsrs = BreakUpUsrs & Main.SafeList.ListItems(i).Text & ", "
'count up until limit hit
CountMe = CountMe + 1
'if (i) doesnt = the amount if users it will goto else,
'if (i) does = SafeList.ListItems.Count it will do whatever was left in breakupurs (but its not)
If (i = Main.SafeList.ListItems.Count) Then
'this checks to see if anything is left in breakupurs if, 'there is it will do its job if not it will skip it
If (BreakUpUsrs <= "") Then
'wait 2 sec to keep from flooding
Main.Wait 2000
'sending whats left in breakupurs that = less then 5
Main.CoWz.Send BreakUpUsrs & " ÿC2[Done..]"
'erasing breakupurs
BreakUpUsrs = ""
'resetting countme
CountMe = 0
End If
Else
'if countme is = 5 it will send then reset countme to 'do it over again adding rest of users from safelist
If (CountMe = 5) Then
'wait 2 sec to keep from flooding
Main.Wait 2000
'sending the broken up 5 users
Main.CoWz.Send BreakUpUsrs & " ÿC2[More..]"
erasing breakupurs
BreakUpUsrs = ""
'resetting countme
CountMe = 0
End If
End If
Next i
[/code]

please help or show a better way :P

im still trying to get this on my own but help will
be very greatly apreciated

thanks,

-BlackDeath




[/edited]

ok lets say there is 7 users
jim, mike, joe, sam, josh, bob, steve

in listview

ok so the users got broken up above and then when the countme hits 5 it will send the first 5 users like so

jim, mike, joe, sam, josh,

then the countme gets reset to 0 and breakupurs cleared to nothing and listview is still going then adds

sam, josh then here is where the problem comes in it wont send the last 2 thats left in breakupurs because countme is waiting to hit 5

Rephrase your question into actual sentences. I cannot decipher what you are trying to do, nor the problem you are having.

In the future, indent your code.

Capital letters and punctuation are a plus as well.

Just curious as to why you check if BreakUpUsrs is less than or equal to null. Should not be able to get a string less than null as far as I know.

haha i feel stupid i fixed the problem thanks anyway you may delete this post

I fail to see what "BreakUpUsrs" is meant to be....
[quote]few users left in my BreakUpUsrs like 3 out of 5 it wont list them well whatever was left in the BreakUpUsrs[/quote]
What might fix the problem, is putting the number of "breakupusrs" in an array or listview:
[code]
if countme = 5 or ubound(aryusers) < 5 then
'you send it.
end if
[/code]
form1.breakupusrs.listems.count [instead of ubound(aryusers)]if you dont want to use an array. Here is what I think it should look like:

[code]
CountMe = 0
For i = 1 To Main.SafeList.ListItems.Count
BreakUpUsrs = BreakUpUsrs & Main.SafeList.ListItems(i).Text & ", "
CountMe = CountMe + 1
If (i = Main.SafeList.ListItems.Count) Then
dim aryusers() as string
aryusers() = split(breakupusrs, ", ")
If (if ubound(aryusers < 5) Then
Main.Wait 2000
Main.CoWz.Send BreakUpUsrs & " ÿC2[Done..]"
BreakUpUsrs = vbnullstring
CountMe = 0
End If
Else
If (CountMe = 5) Then
Main.Wait 2000
Main.CoWz.Send BreakUpUsrs & " ÿC2[More..]"
BreakUpUsrs = vbnullstring
CountMe = 0
End If
End If
Next i
[/code]
Hurray! That should work. And I cleaned up your source ;)

thanks anyway but i guess i should have explained a bit more but i was also working on it while posting

my users was not listed in listview with username, usrname

they all had there own listitem index

thanks anyway but mine works fine and my code didnt really have those comments i added them to explain a little