I've looked around the intel website for drivers that might be needing an update and didnt find much, my procressor speed is running at 798Mhz. I am wondering why, and if anyone has some idea's on how to get it closer to 1.86Ghz.

Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Processor: Intel(R) Pentium(R) M processor 1.86GHz
Memory: 1024MB RAM
       

It would be in your BIOS setup.

What would i need to edit or configure?

When your computer starts up, hit delete. (This is for most setups)

Look around the options, but don't change anything if you don't know what it does.

Well, I can't seem to get into the BIOS settings screen, i tried to hit delete when i reboot but i get a message saying that Windows didn't load correctly and gives me various options to load in Safe mode or Load the last known good configuration that was used last or load windows normally. I am on a labtop here, that might make a different. I know how to get into BIOS normally on my PC btw.

[quote author=MrRaza link=topic=12734.msg127249#msg127249 date=1126066804]
Well, I can't seem to get into the BIOS settings screen, i tried to hit delete when i reboot but i get a message saying that Windows didn't load correctly and gives me various options to load in Safe mode or Load the last known good configuration that was used last or load windows normally. I am on a labtop here, that might make a different. I know how to get into BIOS normally on my PC btw.
[/quote]
That scren is activated by F8, or a bad windows start up..

Read your screen when booting up for anything to do with setup or bios.

Try plugging your laptop in. Most laptops automatically underclock when not plugged in to conserve battery life.

Well, it is plugged in, but maybe i will take a look at Power Management Options to see if something there is underclocking it.

edit: nope.

It might just be throttling down the speed to keep heat down when not in use. See: Enhanced Intel SpeedStep Technology.

[quote]
Mobile Intel® Pentium® M Processors support Enhanced Intel SpeedStep® technology, combining high speed performance with power-saving innovation. The benefit is a better match of performance to application demand. Intelligent power distribution focuses system power where the CPU needs it and automatically regulates power usage to preserve battery life.
[/quote]

http://www.intel.com/technology/itj/2003/volume07issue02/art03_pentiumm/p10_speedstep.htm, so when I NEED the processor speed, it actally increases the speed at which my computer runs at, and then lowers it when system resources arent being used. Can I have the option of choosing a speed that can be set at a certain point all the time?

[quote author=MrRaza link=topic=12734.msg127255#msg127255 date=1126069607]
http://www.intel.com/technology/itj/2003/volume07issue02/art03_pentiumm/p10_speedstep.htm, so when I NEED the processor speed, it actally increases the speed at which my computer runs at, and then lowers it when system resources arent being used. Can I have the option of choosing a speed that can be set at a certain point all the time?
[/quote]
No.  This is done to prevent components from overheating.

[quote author=MrRaza link=topic=12734.msg127255#msg127255 date=1126069607]
Can I have the option of choosing a speed that can be set at a certain point all the time?
[/quote]

Why would you want to do that?

Just a guess, but the program your using is meant for Intel Pentiums. The Mobile (M) chips are smaller, and slower. Your probably not going to get over 800MHz.

[quote author=Joe[x86] link=topic=12734.msg127446#msg127446 date=1126221678]
Just a guess, but the program your using is meant for Intel Pentiums. The Mobile (M) chips are smaller, and slower. Your probably not going to get over 800MHz.
[/quote]
Joe, they can't market a chip as 1.86GHz when it's only 798MHz.

I am using amd64 turion. When I am plugged in my clock is 1.6ghz, when I am not plugged in I am doing 800. On my laptop it is a power conservation thing and not a heat thing. It will upclock to 1.6 when on battery when the proc is under load, but it goes down to 8 when idle, but when plugged in it stays at 1.6 even when idle.

[quote author=quasi-modo link=topic=12734.msg127461#msg127461 date=1126228871]
I am using amd64 turion. When I am plugged in my clock is 1.6ghz, when I am not plugged in I am doing 800. On my laptop it is a power conservation thing and not a heat thing.
[/quote]

That's a heat thing, too -- it can't run the fan as much if the power cord is not plugged in.  So, it has to run slower and cooler.

[quote]Joe, they can't market a chip as 1.86GHz when it's only 798MHz.[/quote]
Harr. Thought the program detected something on the chip that had its speed, or a chip name and switch()'d for its speed or something. My bad!

[quote author=MyndFyre link=topic=12734.msg127462#msg127462 date=1126229043]
[quote author=quasi-modo link=topic=12734.msg127461#msg127461 date=1126228871]
I am using amd64 turion. When I am plugged in my clock is 1.6ghz, when I am not plugged in I am doing 800. On my laptop it is a power conservation thing and not a heat thing.
[/quote]

That's a heat thing, too -- it can't run the fan as much if the power cord is not plugged in.  So, it has to run slower and cooler.
[/quote] True, I mean you could run the fan as much though, it would just eat up the battery real fast if they did though.

[quote author=MyndFyre link=topic=12734.msg127264#msg127264 date=1126077553]
[quote author=MrRaza link=topic=12734.msg127255#msg127255 date=1126069607]
http://www.intel.com/technology/itj/2003/volume07issue02/art03_pentiumm/p10_speedstep.htm, so when I NEED the processor speed, it actally increases the speed at which my computer runs at, and then lowers it when system resources arent being used. Can I have the option of choosing a speed that can be set at a certain point all the time?
[/quote]
No.  This is done to prevent components from overheating.
[/quote]

No its not.

[quote author=Intel]
In Portable/Laptop mode, frequency and voltage changes depend on the application demand. This mode is the normal usage mode when the system is not connected to an AC power source. This mode demonstrates the effectiveness of combining the performance and power-awareness of the Pentium M processor with the energy-saving nature of the Enhanced Intel SpeedStep technology to provide end users with breakthrough mobile performance and extended battery life.
[/quote]

They all underclock to preserve battery life and not because of heat related reasons.

Though the two are connected because it will be hotter at a full clock, but then the fan has to run continuously, using even more power.

The power consumed by the fan would be trivial compared to some of the more power hungery components.

[quote author=Shout link=topic=12734.msg127854#msg127854 date=1126527419]
The power consumed by the fan would be trivial compared to some of the more power hungery components.
[/quote] I agree, but I was referring to an earlier point made by MyndFyre